Home » Getting Started » 02 & 816 SXB- Getting Started

02 & 816 SXB- Getting Started

Capture816SXB-highlight

 

Step 1

Plug in your XB via USB

 

Use a micro USB cable to plug your XB into your computer. This will both power the board and provide a WDCTools development interface. The XB has a built-in simple operating system called a Monitor which is located in the FLASH memory. The Monitor is always there and is the built-in interface that is all you need to get started with the WDCTools and your first project.

Power

All of the SXBs have built-in 32K bytes of SRAM for program and data storage and 128K bytes of FLASH memory organized as 32K byte blocks for easy switching between applications, tasks, or saving precious data. Unlike the Apple, Commodore, and Atari systems, no floppy or hard drive is needed. You are free to use the low power solid state memory in ways you only might have dreamed of before.

The FLASH can be written right in the socket or pre-programmed in a FLASH chip programmer. The memory contained in these small boards are equal to or greater than the memory of some of your favorite legacy systems that used the 6502 microprocessor.

-Micro USB Cable NOT included

Step 2

 

Get Started with WDCTools

 

Get Started with WDCTools

  1. Download WDCTools Install WDCTools and set update preferences with installer

  2. Download D2XX FTDI Driver

  3. Download the WDC Programming Manual

        *Find WDCTools Support  videos on YouTube

 

The WDCTools is NOT for resale or reverse engineering of our technology in any form and is NOT provided for development of commercial products that use non–WDC 65xx processors in Core or Chip form.

Step 3

Browse to your WDCTools example project

 

There is a getting started demo project for each board.  The demo folders are:
W65C02SXB = C:\WDC\W65C02SXB\Projects\W65C02S_Demo
W65C816SXB = C:\WDC\W65C816SXB\Projects\W65C816S_Demo

If you do not have these folders, you can download the project from WDC’s Github repository and place in the proper folder as shown above:
W65C02SXB Getting Started Demo – https://github.com/WesternDesignCenter/W65C02SXB-Demo7Seg

W65C816SXB Getting Started Demo –  https://github.com/WesternDesignCenter/W65C816SXB-Demo7Seg

 

What’s Next:

You should be up and running with your board.  Please see the W65C02SXB or W65C816SXB product page for technical information, Datasheets and more.